Sensing Edges

Sensing edge serves as an effective means of prevention of getting caught in automated machines, and also be used for emergency stop of medical equipment, collision detection of AGV etc.

2-wire type and 4-wire type

  • ◆ 4 wire type circuit control unit (Cable disconnection or short circuit detector) for use in combination is recommended as standard specification. In case of that, 4-wire lead type is required.
    ◆ When placing order, specify lead configuration (lead exit as from each end or both-one end ) & length.
    ◆ Vertical bend processing is available on some series (OT-08D / Minimum bending radius 100mm)

※ In case of using fail-safe controller, select the 4-wire type.

Channel designations

  • ◆ Channel F indicates the aluminum flat type
    ◆ Channel A indicates the aluminum angle type
    ◆ When placing order for channel only, indicate each sensor type and channel designation (F or A)

Applications

Prevention of getting caught in automated machines, Emergency stop for machinery, collision detection of AGV etc.

Line-up

【OT-10BP-B（black）】
【OT-10BP-R（red）】

  • ●External sheathing: PVC
  • ●Small size type: Instantaneous activation type
  • ●2 colors: Black, Red
  • ●Applications: Collision detection, Machine, Medical equipment, Door, Bumper, etc.
  • ●End cap: CR supplied as standard (Both ends)
  • ●Mounting screw diameter : M3～M4 flat head screw recommended
  • ●Channel F only

【OT-08D-B（black）】

  • ●External sheathing: EPDM
  • ●Medium size type: High sensitivity type
  • ●Applications: Collision detection, Machine, Medical equipment, Door, Bumper, etc.
  • ●End cap: CR supplied as standard (Both ends)
  • ●Mounting screw diameter : M4～M6 flat head screw recommended
  • ●Channel F only
  • ●Vertical bend processing is available (Minimum bending radius 100mm)

【OT-TS6F-R（red）】
【OT-TS6F-B（black）】

  • ●External sheathing: PVC
  • ●Mini size type: Instantaneous activation type as high sensitivity outer switch
  • ●2 colors: Black, Red
  • ●Applications: Moving door, Medical table, machinery, etc.
  • ●Mounting screw diameter : M3～M4 flat head screw recommended
  • ●End cap: PVC (Option)
  • ●Channel: F or A both available

【OT-TS16F】

  • ●External sheathing: PVC
  • ●Mini size type: Instantaneous activation type as high sensitivity outer switch
  • ●Applications: Moving door, Medical table, machinery, etc.
  • ●Mounting screw diameter : M3～M4 flat head screw recommended
  • ●End cap: PVC (Option)
  • ●Channel: F or A both available

【OT-TS26F】

  • ●External sheathing: PVC
  • ●Medium size type: Instantaneous activation type excels in lateral operation to reduce movement of over travel
  • ●Applications: Machine edge gates, Stage lifts, bumper, elevator doors, etc.
  • ●Mounting screw diameter : M4～M6 flat head screw recommended
  • ●End cap: PVC (Option)
  • ●Channel: F or A both available

【OT-TS47F】

  • ●External sheathing: TPE
  • ●Large size type: Instantaneous activation type
  • ●Reacting to instantaneous and low speed operation
  • ●Reduction of shock from instantaneous and low/high speed operation (Operation is priority)
  • ●Applications: High speed door switch, Gym doors, Accordion doors, Vehicle bumper switch, etc.
  • ●Mounting screw diameter : M4～M6 flat head screw recommended
  • ●End cap: CR (Option)
  • ●Channel: F or A both available (Common channel for TS47 and TS57)

【OT-TS57F】

  • ●External sheathing: TPE
  • ●Large size type: Instantaneous activation type
  • ●Reacting to instantaneous and low speed operation
  • ●Reduction of shock from instantaneous and low/high speed operation (Operation is priority)
  • ●Applications: High speed door switch, Gym doors, Accordion doors, Vehicle bumper switch, etc.
  • ●Mounting screw diameter : M4～M6 flat head screw recommended
  • ●End cap: CR (Option)
  • ●Channel: F or A both available (Common channel for TS47 and TS57)

【OT-TS3F-Y（yellow）】
【OT-TS3F-B（black）】
【OT-TS3F-R（red）】

  • ●External sheathing: PVC
  • ●Molded with external cover
  • ●Micro edge type: Instantaneous activation type
  • ●3 colors: Red, Black, Yellow
  • ●Applications: Automatic door, Medical equipment, Foot switch. Etc.
  • ●End cap: Not applicable but with clamp instead
  • ●Mounting screw diameter : M3 flat head screw recommended
  • ●Channel F supplied with clamp as standard

Option

【Clamp】

  • ●OC-043 Applicable type (OT-TS3F, OC-04)
  • ●Effective in mounting or as end cap function for OT-TS3 or OT-41BP series
  • ●A single set of clamps contains one each for the lead wire side and terminal side
  • ●Mount by using M4 screw (screw is not supplied )
  • ●Clamp is molded of Duracon resin (White)
  • ●Aluminum channel and clamp are supplied as standard in OT-TS3F series
  • ●Clamp area on both ends are inactive area

【Fail-safe controller】

  • ●SC-2（AC only）
  • ●4 wire type circuit control unit (Cable disconnection or short circuit detector)
  • ●Improve plant safety

【Fail-safe controller】

  • ●PRSU-4
  • ●4 wire type circuit control unit (Cable disconnection or short circuit detector)
  • ●Standards certified product
  • ●CE Marking product
  • ●Safety Grade: Type 3
  • ●High accuracy safety double coil installed

Top of Page